1 / 2
Conductive filament - test sample
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After becoming interested in the properties of conductive filament, I got some and printed this part for simple tests.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The resistance of the printed trace is quite high despite its large cross-section, and the white LED barely lights up—even though it's powered by a 9V battery.
For printing, I recommend feeding the filament directly into the extruder rather than through a PTFE tube, as the filament is quite brittle.
Typical uses for conductive filament:
- Printing simple circuits and touch sensors
- Embedding LEDs and switches
- Creating wearable tech and smart textiles
Print instruction:
- printer: dual-extruder printer is recommended
- material:
- conductive trace: conductive filament (used for my test: RepRapper conductive PLA)
- base plate: PLA
- supports: no
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,6mm recommended
- brim: not required
- enclosure: not recommended