Waveshare 5" Round LCD Mod For Lian Li O11D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spice up that case!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a simple case mod for the Lian Li O11D. My specific one is the O11D Dynamic EVO RGB - I guess it fits others in the series but I am not sure - the top appears to have the same mounting points on the others in the series. Print it first and check if you are not sure before buying an LCD.
I do not think this will fit if you have a 420 radiator installed up top, but if you have a 360 or smaller up there it will fit.
To fix this kit you need, in addition to the case:
The Waveshare 5" round LCD kit - fortunately it comes with cables that are long enough!
M4 or M4S heat set inserts. Ruthex or CNC Kitchen work perfectly.
4x M4x12 screws
Two of the flattish M4 screws from the Lian Li kit for the case
Instructions:
Install the two heat set inserts in the holes in the top with a soldering iron
Plug the USB and HDMI cables in the top of the mount
Attach the mount to the back of the screen using the M4X12 screws
Disassemble your case and mount this at the front of the radiator/fan mounting area at the top with the flatting M4 screws.
Above where your motherboard ports are in the back of the case there is a plastic cap. pop that off and thread the cables out through it.
Secure cables as necessary inside the case
Plug in cables and reassemble case
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨