Piano Flange and Shank Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flange and hammer shank for pianos. This set was modeled from an old KNABE piano.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This flange/shank set was modeled from an old Knabe piano.
I haven't concluded what is the best orientation for the Lever or the Flange. Side down or bottom down have different pros and cons. You may want to experiment and find out what works best for you.
I have not tested these inside a piano yet. If you use ‘em, let me know if they work ok for you! If I am able to test them out, I’ll update here.
PLA seems to be an adequate material for this job because of better precision and material stiffness. It more closely approximates the materials of the original pieces and will print cleaner than PETG, especially when using supports.