Water Bottle Mounting Bracket for Aventon Level 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The moves the water bottle attachment location from the step through to the rear rack support.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Aventon Level 3 provides for mounting a water bottle holder on the main frame. However if you have the Step Through model at attache a water bottle holder there it restricts your ability to actually “step through” the frame of the bike. This model simply clamps to one of the support arms for the rear rack and provides an alternative location to attach a water bottle holder. The model requires 2-4mm heat set threaded inserts, 2-5mm heat set threaded inserts and 2-4mm X 20mm cap head screws with washers. I printed it laying on it's back with no supports using PETG.