Modified enif's 18650 Battery Holder with builtin supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of enif's 18650 battery holder
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Small edit to enif's 18650 Battery holder. I just thinned the spring, which seems to make the pressure on the battery more even, and added integrated supports in build (you do not need to add more) which easily and cleanly snap off.
Photos are from my remix of the 18650 TP4056 battery charger (I have not had need to reprint out just the holder, but the only real difference is the lack of slot for the TP4056 module), and a prototype 18650 RC module that I should be posting soon.
https://www.thingiverse.com/thing:5374830
If you notice the curve in the one picture it is because my heated bed module was broken at the time (It got better).
Parts
None
Assembly
Break or cut off supports
Attributions
Modified from enif’s design - https://www.thingiverse.com/thing:456900
On Other Sites
On thingiverse. - https://www.thingiverse.com/thing:5374835
Edits
05/07/22: I have been prototyping a RC car battery pack using a modified enif's design and one of the big problems was getting the back battery out without tools, so I added a 10mm hole to put in a ribbon pull (I used some ~8mm ribbon I had around) to remove the batteries, it makes it so much easier I am putting it on all my battery holders now. This is on version j1.1. Picture is of prototype RC battery holder that should be coming soon.... And my heated bed is fixed!