TPU Guide for Top Mounted Spool Holder AD5M
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Effectively controls the "unspooling" of filament which is caused by rapid machine movement. Fits 30mm shaft/roller.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 1013
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Narrow, half kilo spools of TPU often easily unwrap/unspool when utilizing the top mounted TPU spool holder attachment for the Flashforge printed enclosure. Fast machine movements cause the filament to be “jerked” off-center. This leads to large loops of filament unspooling. These loose “loops” wrap around the fixture which results in excessive restriction and ultimately to print failure.
My TPU filament Guide effectively prevents the unspooling by controlling unrestrained movement.
The normal feed rate of the filament is not restricted.
Reinforcement has been added to the inside 90° corner of the “Eye” end to help prevent failure at that location.
Installation is simple:
Hang the Filament Guide onto the 30mm holder/roller with the eye positioned toward the center of the filament roll. [as shown in the photographs]
Feed the TPU filament through the eye at the end of the guide arm.
Continue with the filament loading steps as usual.
HS/PETG
nozzle 250°C, bed 80°C
Print as oriented in the file. Tree support/2mm diameter. Contact points/ 0.2mm.