bike gears stuck pen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a pen holder that consists of 4 gears like the ones used in bikes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
Description
i designed a pen holder that consists of 4 gears like the ones used in bikes.
designed this in fusion:
it has 5 axis like bolts and spacers between the gears to hold up all together stacked.
there are 5 nuts that secure the assembly at the end of the axis that are threaded on top.
i usually design engineering and functional stuff,
in addition i always have in mind that the final model can be printed on small printers like a1 mini that has 180x180mm build plate.
so this design cover both of these.
The whole design consist of 3 plates.
one for the axis and 2 for the gears .
Features:
free support design
easy assembly
a1 mini friendly
Assembly info:
Stuck all the gears with the face that printed down to the plate facing up.
insert the spacers between the gears
the solid gear is at bottom.
apply the nuts to the axis.
ready to use.
watch the assembly video below:
🙏 Please don't leave negative feedback if you don't doublecheck that you used your own well working filament profiles and be very sure that you build plate is well cleaned! The designs i upload are well tested so you don't have to worry about them. i never upload a design without fully tested!
🙏 Feel free to Follow, Like & Share this work — your support means the world and helps me bring more designs.
you can always support me by buying me a beer!