Eleksmaker Mana SE replacement base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple replacement for the perspex Mana SE base plate since mine cracked. The same physical size but integrated the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple replacement for the perspex Mana SE base plate since mine cracked. The same physical size but integrated the bottom spacers into the print and added a 10mm extension with new bolt holes on the cable side for cable management (coming soon)
edit: they are through holes, works fine in Cura, I forgot to delete the 0 thickness hole centre.
Added the cable chain interface part, bolts onto the base plate and one of the stock perspex top lid case holes.
Chain can be fitted flush to the base or in the higher section which aligns it with the height of the stepper on the eleksmaker A3/A5 laser. This is for standard banggood 10x10mm cable chain.
It will need a longer laser cable though, the motor cable should be sufficient.
Category: 3D Printer Parts