Benchtop Case for Heltec V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Features support for a buzzer, with room for any other modules (GPS, environmental, etc).
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 983
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Benchtop Case for Heltec V3 - Desktop Meshtastic Node
A purpose-built enclosure designed for desktop/benchtop use as a stationary Meshtastic node. This case features integrated buzzer support, generous clearances for expansion modules, and battery backup for uninterrupted operation.
Design Intent
This case is designed primarily as a desktop Meshtastic station that bridges your phone/laptop to the mesh network. While the 18650 battery makes it technically portable, the expanded size and potential power draw from modules (GPS, sensors) make it best suited for stationary use with the battery serving as backup power during outages.
Features
- Desktop-Optimized - Larger footprint provides stability on desk surfaces
- Battery Backup - Internal 18650 maintains operation during power interruptions
- External Antenna Support - Reinforced mount for SMA to U.FL adapter for improved range
- Audio Notifications - Integrated side-mounted buzzer with sound grille for message alerts
- Expandable - Internal space for GPS and environmental sensor modules (BME680, etc.) for advanced telemetry
- Tool-Free Assembly - All snap-fit construction for easy assembly and maintenance
- USB Powered Primary Operation - Designed to run primarily from USB power
Use Cases
- Desktop mesh network gateway
- Fixed environmental monitoring station
- Home/office Meshtastic hub
- Emergency communication backup node
- Development and testing platform
Included Files
- Main body
- Back end
- Front lid
- Switch
Required Components
- Heltec V3 LoRa board
- SMA to U.FL adapter cable (usually included with Heltec)
- External SMA antenna
- 1x 18650 battery
- Standard single 18650 battery holder (friction fit)
- 3V active buzzer (2-terminal)
- Slide switch
- USB-C cable for primary power
- Optional: GPS module, environmental sensors (BME680, etc.)
Print Settings
- Layer Height: 0.12mm (for best snap-fit tolerance)
- Infill: 20-30%
- Supports: Yes - mainly for the SMA connector mount
License
This design is released for personal, non-commercial use only. This model cannot be sold or used for commercial purposes without permission.
Please respect the open-source community by:
- Not selling printed copies of this design
- Sharing your makes and improvements
- Providing attribution when sharing or remixing
Disclaimer
Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk.
Design Notes
This case was created from scratch to meet the specific needs of desktop Meshtastic deployments. The design prioritizes expandability and functionality over portability, with generous internal space for additional modules and a reinforced SMA mount that handles the stress of permanent antenna attachment. Perfect for building a reliable mesh network base station.
Acknowledgments
Visual inspiration drawn from various Heltec V3 case designs in the community, including the popular Bender Battery Case. All modeling and design work is original.
Note: Pictures shown may include slight modifications with added logos for personalization.