1 / 2
5 gallon bucket 1/2 inch hose holder — zdjęcie 1
1 / 2

5 gallon bucket 1/2 inch hose holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I use this to hold the hose of my syphon in place while doing water changes on my aquarium.

Ocena
0 / 5
Polubienia
5
Pobrania
67
Wydruki
0
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

I print this on its side, should work with no supports. It will be a bit snug when snapping onto the edge of the bucket. Feel free to scale up to help it fit to your bucket. If scaling down, you may run into issues putting your hose through the .5 inch hole.

Tagi