Tripod Holder for iPad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold an iPad in landscape orientation with holes to take headphones, and clamped directly into a tripod…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Bracket to hold an iPad in landscape orientation with holes to take headphones, and clamped directly into a tripod that takes a wedge mount. This mount doesn't come up high enough to block the charging hole.
Based on my previous https://www.thingiverse.com/thing:3913046 - see that description for details.
Verify that the wedge dimensions are correct before printing.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.3mm. Standard 0.4mm nozzle
Infill:
15%
Notes:
You'll need to enable supports touching the build plate, but you can use support blockers so just the tip and middle of the left and right legs get supports - bridging will work to get from the central hub to the middle of each leg, and from there to the tips.
Category: Camera