Caliburn Trigger Guard w/ Spring Peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the trigger guard to allow a spring to be connected from the trigger to the handle. This allows for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the trigger guard to allow a spring to be connected from the trigger to the handle. This allows for a slightly heavier trigger pull. You will still need a spring from the sear to the standard peg location in the handle. This does not replace that spring.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
.15
Infill:
100%
Notes:
Prints well at any layer height. Recommend 100% infill for rigidity. Spring is a tight fit over the peg. You will need supports. See images for support structure and print orientation.
Category: Mechanical Toys