Reversible headphones holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple headphone hook that clamps to your desk and is reversible allowing you to either hang your headphones…
- Ocena
- 4,429 / 5
- Polubienia
- 122
- Pobrania
- 654
- Wydruki
- 9
- Wyświetlenia
- 3238
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple headphone hook that clamps to your desk and is reversible allowing you to either hang your headphones at the front edge of your desk (using one of the "HP OuterHook*" styles), or back, underneath (using "HP InnerHook").
If your desk top surface is thin, like a glass top, print the "HP Spacer" model to screw onto the bolt to extend it. For thicker desktop surfaces, the Spacer isn't required.
Print the screw, bolt, and cup in a contrasting color for a unique look!
Pick the type of hook you wish to use, then fasten it to the "HP Main" body using the little "HP Screw". The "HP Bolt" that clamps the holder to your desk will thread into both the Main body and the hook for a secure fit (see assembly animation below).
Update 2022-01-03: Added a STEP file with all components for those that wish to modify my design.
Update 2022-01-24: Added a curve/hump option for both Outer hooks: HP OuterHook-Curve and HP OuterHookLong-Curve that matches the curve of your headband.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.16
Infill:
20%
Filament:
Duramic PETG or PLA+ PETG or PLA+
Notes:
Orient the parts on the buildplate as shown in the 1st slicer pic. Supports aren't required but I did use support enforcers under the curved sections of the Main body and the Outer bracket as shown in the 2nd slicer pic for cleaner looking edges.
Assembly animation:
Designed this in Fusion 360
Category: Audio