T12 / T15 soldering iron tip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a completely over-engineered T12/T15 soldering iron tip holder. It can be wall mounted to hold tips in either a…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Here's a completely over-engineered T12/T15 soldering iron tip holder. It can be wall mounted to hold tips in either a vertical or horizontal orientation. The round, enclosed portion of the holder flexes outward to make inserting and removing the tips easier. I modularized the design by creating three different versions that can be fitted together making it infinitely expandable.
- The "Top" model has male and female dovetails with screw holes at each end.
- The "Middle" model is the same as "Top" but has only one screw hole in the middle (if needed).
- The "Bottom" model has only female dovetails and with screw holes at each end.
Do you have a KSGER soldering station? Take a look at my KSGER mounting bracket. It allows you to keep up to four of your favorite tips on top of your soldering station.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20%
Notes:
I suggest using 2 perimeters/walls, 3 bottom layers, 4 top layers. These work just fine when printed in PLA as well.
Category: Tool Holders & Boxes