DT3 Cable Tester (Case, Box)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The PCB needed a case, so here it is:
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 267
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The PCB needed a case, so here it is:The PCB needed a case, so here it is:
I provide 3 versions, whereas the box is always same:
- Lid blank, no text.
- Lid with text inserted. Print the lid face on buildplate. 2 colors, MMU, AMS, ERCF preferred.
- Lid with text inserted. Red dot as power IN symbol has extra color. Print the lid face on buildplate. 3 colors, MMU, AMS, ERCF preferred.
Note: After print of the lids I closed visible side (top) with some Scotch tape, thoroughly make sure this seals the holes! Then from inner side I filled UV-curing super glue until full, mabye less also works? Then cautiously expose to UV-light from both sides. I exposed it few seconds underneath (top side) then opposite side and so on for a few times. For me it looks great!
For smoother fit I added a narrow strip of PVC insulating tape the have the PCB sit on, my printer did a great work so I just needed to fit both parts together without any glue of other means.
I printed the parts on Prusa MK4 with MMU.
Explore my other Printables: https://www.printables.com/de/@Tritschi Explore my other Printables: https://www.printables.com/de/@Tritschi