Bracket for KSGER Soldering Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to mount my KSGER 2.1 Soldering Station (with aluminum case, 87.5mm wide, 38mm tall (42mm w/rubber feet) out…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 671
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to mount my KSGER 2.1 Soldering Station (with aluminum case, 87.5mm wide, 38mm tall (42mm w/rubber feet) out of the way to free up space so I designed these brackets to clamp the station to the side of my workbench hutch.
Note, the opening height of the bracket (42mm) requires the rubber feet to still be on the station for the station to be clamped securely.
Updated 03/06/2021: Added v2 of the bracket with a different font for 'KSGER'. I also added a bracket that allows you to use up to four of the T12 tip holders I designed (one "Bottom" style and up to 3 "top" style) to keep your favorite soldering tips close to the soldering station. The 3rd photo shows this with just 2 tip holders inserted; 1 “Bottom” and 1 “Top”. Note: Do not print the T12 Tip holder bracket if you don't plan to use the tip holders -- the bracket will not clamp the station securely without them.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.16
Infill:
50%
Filament: Hatchbox 1.75mm PLA Blue
Category: Tool Holders & Boxes