1 / 3
Bosch GCM8SJL circular saw adapter to 31.8mm vaccum — zdjęcie 1
1 / 3

Bosch GCM8SJL circular saw adapter to 31.8mm vaccum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vaccum hose adapter to fit a regular round vaccum nozzle to fit Bocsh miter saw. My vaccum nozzle is 31.8 mm, and the…

Ocena
0 / 5
Polubienia
7
Pobrania
49
Wydruki
0
Wyświetlenia
337
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Vaccum hose adapter to fit a regular round vaccum nozzle to fit Bocsh miter saw. My vaccum nozzle is 31.8 mm, and the hole is ever so slightly tapered for a snug fit.

Green piece in PLA, managed to break the tabs on that.

I printed with 3 perimeters.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

25%

Filament: add:north PETG Glitz Grey


Notes:

Printed with brim for adhesion with PETG on my printer, might not be needed on your setup. Did not need any adhesion for the part when printed in PLA, on creality glass bed. Using their magnetic bed for PETG, as it seems to stick better.

Printed in PLA as a first draft, but i managed to break the tabs so i decided to reprint in PETG, this part is on the printer right now. The fit was snug and it seemed study, with some careful handling i think PLA would work as well.

You can modify the model to fit your needs. https://www.tinkercad.com/things/fl6qJoAc27B

Category: Parts

Tagi