1 / 2
TTS 3018 Pro (full metal z-axis) limit switch holders — zdjęcie 1
1 / 2

TTS 3018 Pro (full metal z-axis) limit switch holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small addons to install limit switches on Two Trees TTC 3018 Pro (full metal z-axis).

Ocena
5 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
183
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Simple components that simplify the installation of limit switches on the TTC3018 Pro. Compatible with vertical switches (used, for example, in Genmitsu 3018-PROver).

You will need two endstop-xy and one endstop-z.

Installation on the Z axis requires longer screws holding the NEMA motor, and drilling holes in the bakelite on the X and Y axes. Screw with M3 screws and self-locking nuts.

Tagi