crutch holder for gemino rollator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
walking stick crutch holder for gemino 30/60 rollator/walker
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder set is specifically designed for the gemino rollator due to the shape of the upper handle bar. Can hold crutch or stick from 14 to 22mm diameter (tested), but probably can do little above. I put a screw on the crutch side, necessary only for diameter under 16/18mm to better hold the stick.
I've used m5 screw for both hole.
In the model there are both the front and side version mount, but only in the front version i was able to put also a universal bracket.
The lower round tray is taken from a file by RivaDynamite on Thingiverse
If you like my designs and would like to sell prints, or just want to support me, here's my Patreon