Vintage Anatamy Bidloo Hueforge

Multicolor Hueforge 3D print of a vintage anatomy image (Bidloo t87). This print is 178 mm in height, 108 mm wide, and 2.3 mm thick. I scaled down the original from 240 mm in height so that it would be around 7" in height for a frame if you want. You may scale it back up but do not scale the z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6 (any black can be used since it's the base)
PLA+ Esun Bone White Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Bone White
At layer #19 (1.6mm) swap to Jade White for the rest.

If you make any changes to scale, make sure to follow the layer height for color changes rather than layer number. In my generic 3mf I combined the first few solid black layers (0.48 mm) to print with 0.16 mm layers. The rest of the layers are at 0.08 mm height. If you do not have an AMS, simply add pauses at the appropriate layer heights.

Additional notes for Hueforge prints: turn off part cooling (I have done this in the filament settings of the 3mf). Watch the first layer to make sure it's sticking well. If you use different filaments, the print may look different from mine depending on the transmission distances (translucency) of those particular filaments. Ignore the messages about supports. Slicing is not fast.

I printed this on a Bambu A1. This size will also just fit on the A1 mini.

Print was generated and printed by me using Hueforge (https://shop.thehueforge.com/) and public domain vintage anatomy images (https://www.nlm.nih.gov/exhibition/historicalanatomies/browse.html). 

I have a limited commercial license for Hueforge. This model can be printed for personal use, not for commercial use.

Model for the skeletal hand stand.