Simracing - Heel Cups (for Formula Pedal Spacing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because of a lack of a proper heel rest / heel stop on the Ultimate+ pedal base I decided to create some heel cups…
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 339
- Wydruki
- 1
- Wyświetlenia
- 2914
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Because of a lack of a proper heel rest / heel stop on the Ultimate+ pedal base I decided to create some heel cups (inspired by some screenshots of F1 pedals) myself.
It really helps keeping your foot in place in a good and constant position. It also prevents the foot from lifting off the heel place and supports sliding the accelerator instead of lifting the foot which gives proper control.
This is meant to be the combined design. I hovever have also exported the single cups if people want to use them standalone. Be aware, that they are slightly asymmetrical, so there's a "left" and a "right" part.
I have also added the source Fusion 360 files and STP files.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Verbatim PLA Black
Notes:
5 Perimeters, 5 Top/Bottom layers, 0.6mm Infill Width (rectangular)
Attach some double sided adhesive tape for mounting
I jut used a thin 3M double sided adhesive tape (40mm width) to stick it to my Heusinkveld Ultimate Pedal plate. Holds perfectly so far.
Category: Video Games