Extruder rotation Dharma wheel - Prusa mk2.5 with 45degree fan R3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello i used 2 magnets and printed the 15mm pin and the wheel At the 15mm pin, glued on a 10x10x5mm magnet.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello
i used 2 magnets and printed the 15mm pin and the wheel
At the 15mm pin, glued on a 10x10x5mm magnet.
And the other magnet is round 8x3mm, to go on the hole in the extruder.
Printed this in PLA with green to yellow color change filament.
0,2mm layer hight
Please press Like, before you print this..
And please send me some money, if you have plenty (i have not)
:-)
paypal.me/lammesky
happy printing and good luck..!
Print instructions
Unassociated tags: extruder indicator , extruder visualizer , Original_Prusa_MK2.5
Category: 3D Printer Accessories