Spherical Reverse Bowden Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edit 18 Jan 22: Added a tool-less version that can just be inserted into a 2020 rail, turned 90 degrees and stay…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Edit 18 Jan 22: Added a tool-less version that can just be inserted into a 2020 rail, turned 90 degrees and stay (mostly) in place. :)
I was inspired by some other spherical filament guides I've seen on here, but being that I wanted one that could be used with a Bowden tube, I decided to create my own.
BOM:
Guide
- 1x M6 pneumatic fitting (https://www.amazon.com/Witbot-Straight-Fitting-Connector-Printer/dp/B01NANKRTD)
- 1x M6 nylon lock nut
Large Base
- 1x M3 T-Nut
- 1x M3x6mm Socket Cap Machine Screws
Small Base
- 2x M3 T-Nut
- 2x M3x6mm Socket Cap Machine Screws
Printing:
- Any material
- Print "Guide" on its side with supports hex
I'm going to add a design that doesn't need a base and instead can be inserted into the V-slot rails, then rotated 90 degrees to lock it in place.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
5
Filament: Any Any Any
Category: 3D Printer Parts