HeroMe Gen 7 mount for Carthographer3D eddy current sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Carthographer3D ABL eddy current sensor on the HeroMe Gen7 printhead assembly.Derived from the "generc…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount for the Carthographer3D ABL eddy current sensor on the HeroMe Gen7 printhead assembly.
Derived from the "generc skirt" + ADXL345 sensor mount of the HerMe Gen 7.4
!! This is not tested - I did not receive my Carthographer3D yet !!!
Print orientation has been optimized to minimize support.
Cartghographer3D https://cartographer3d.com/
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.14 - 0.28
Infill:
45
Filament Material:
ABS
Notes:
I printed this in ABS (Geeetech ABS+) like all my HeroMe parts.
For all HeroMe parts, I use
- outer layer height: 0.14mm
- inner layer height (inner perimeters and infill). 0.28mm
- line width 0.6mm
- 45% infill (not really needed here though)
- adaptive cubic infill
- automatic tree support with lean trees, on buildplate only, "only critical" NOT checked
and two postprocessing scripts in OrcaSlicer 2.3.0
- https://github.com/TengerTechnologies/Smoothificator
https://github.com/TengerTechnologies/Bricklayers
in this version:
https://github.com/TengerTechnologies/Bricklayers/blob/main/NonPlanarInterlockingWalls.py
settings see file "settings.zip"
The .3MF is for OrcaSlicer 2.3.0, the _generic.3mf is exported from OrcaSlicer als "Generic 3MF", whatever that means.
The STEP file is created by imprting the 3MF into FreeCAD 1.0 and then coverted from the mesh to a solid and exported as "STEP with colors", the FCStd file is the FreeCAD file from that conversion.
STL is exported from OrcaSlicer. Go for the 3MF if possible.
How I Designed This
Just a few modifications in OrcaSlicer ("add part" / "add negative part").
Category: 3D Printer Parts
