Extended lid for Radxa ROCK 5 Model B (5B) KKSB case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lid for the KKSB aluminium case for the Radxa ROCK 5 Model B, with space for the Power over Ethernet (PoE) module
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An extended lid for the KKSB ROCK 5B case for the Radxa ROCK 5 Model B, designed to provide enough space for a Power over Ethernet (PoE) module - or anything else which adds a bit too much height for the original lid to fit. As the PoE module also prevents the heatsink from fitting, the hex ventilation pattern has been continued instead of providing the mounting holes; the camera mounting hole has also been elided.
Press fit 4x M2.5 nuts into the hex cutouts in the arms (or glue, if they're loose), and the original screws can then be used to attach the lid to the case. This was designed for SLA resin printing, and yielded a very tight press fit; if you're printing it on an FDM printer, you may need to adjust the size of the cutouts - or you may wish to replace them with cylindrical bores suitable for heat-set inserts.