1 / 4
Can dispenser for 0,33l elongated cans (long cans)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can dispenser for 0,33l elongated cans
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (21)Powiązane
This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :)
Can diameter: ca. 60mm
Can lenght: max. 148mm (than you have 1mm on each side buffer)
Amount of cans it can hold: 11 cans
Max. height inclusive cans: ca. 170mm
Max. lenght of the dispenser: 406mm
Dovetail joint tolerance: 0,19mm
Hexagon joint tolerance: 0,14mm
Filament needed: ca. 660g
Print time: ca. 24h for me (depends on settings)
!!! no support !!!