1 / 1
PowerPAL - Powerpole Polarity Tester Case - Your Pal Aagainst Reverse Polarity! — zdjęcie 1

PowerPAL - Powerpole Polarity Tester Case - Your Pal Aagainst Reverse Polarity!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect your gear with a Good Pal.

Ocena
0 / 5
Polubienia
10
Pobrania
56
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

The PowerPAL is a DIY reverse polarity tester for Anderson Powerpole connectors. Using a simple bi-color LED and a 1k ohm resistor, it shows green for correct polarity and red for reverse. This quick project can help protect your ham radio gear, save you from costly mistakes, and give peace of mind every time you connect.

Inspired by WB3GCK’s Powerpole Polarity Tester and the Powerwerx TestBuddy, this remix adapts Faraz Khan’s Anderson Powerpole Housing for easy 3D printing and assembly.

I used ASA, had to scale up to 100.80 percent, printed, let cool, assembled.  I added STEP, STL, and the F3Z file.   I hope this helps you.  Please give proper attribution to Faraz for his original design and me for the Remix. 

Bambu X1, Polymaker ASA, 6 walls, 80 percent infill.

I'll be honest, I am not good with focusing on writing.  Here is a video to show you what I did, that video contains additional links to schematics, info, and more - 

 Thanks for your support. As Mike would say - Ham Harder….. (and as I would add) - 3D Print Harderer.

Tagi