1 / 4
PTFE tube holder / passthrough for MMU or AMS and tent style enclosures — zdjęcie 1
1 / 4

PTFE tube holder / passthrough for MMU or AMS and tent style enclosures

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a pole mounted passthroug plate for better stability of ptfe tubes using MMU in tent style enclosure.

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
154
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The holder is mainly supported by the pole in the back. 

Inner and outer plates are screwed together with M3 screws. I used 6 M3 Inserts, 4 long and two short.

Pole can be clamped down using two M3 screws, pole diameter is 7.7mm and hole diameter is 8mm. Five PC4-M10 ptfe fittings used to hold tubes in place.

Fabric can be pierced by small sharp object like a drill and screws and tubes pushed through after, no need to cut huge hole.

Tagi