1 / 6
Mounting Kit for Water Cooling Filter at PCIE-Slot — zdjęcie 1
1 / 6

Mounting Kit for Water Cooling Filter at PCIE-Slot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting Tool for the "Filter with stainless steel mesh" from "Aquacomputer"

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
181
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Open Community License v1

If you have a water cooled PC, you may intend to use a Filter-Element within your loop, to prevent the pump from sucking in dust/dirt. 

Most In-Line Filter-Elements are not easy to clean, because you have to completely empty your loop or you have to install additional valves.

The Filter with stainless steel mesh from Aquacomputer solves this problem, because it includes the valves directly in the element and you can directly access the Filter just by loosing four screws. But you may face some troubles with the mounting inside your PC-Case. 

There are no intended mountings for the Filter-Element (in the bare Basis) which fit to a normal PC-Case. Aquacomputer sells some additional mounting plates to mount it in a usual fan-slot in your case.

I don't wanted the filter to block a slot for a fan and also to have easy access to the filter itself, if I have to clean it.

So I created this mounting kit to attach the Filter-Element at the backside of the PC-Case. The tubing was routed through the lowest PCIe bracket.

 

Tagi