1 / 3
Reimu Hakurei Fumo Multicolored Keychain (No MMU/AMS needed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2d Multicolored Reimu Hakurei Fumo Keychain which can be printed by swapping the filament between layers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I used the following settings for printing Multicolored:
Layer height: 0.16mm
Starting color: Black
1st swap on layer 9 to brown
2nd swap on layer 10 to red
3rd swap on layer 12 to yellow
4th swap on layer 13 to beige
5th swap on layer 14 to white
