1 / 4
KEEPTEEN D5 Lora Solar Dual Tray Sled (Heltec T114) (Heltec LoRa v3) (Gargomoma FakeTec V5) — zdjęcie 1
1 / 4

KEEPTEEN D5 Lora Solar Dual Tray Sled (Heltec T114) (Heltec LoRa v3) (Gargomoma FakeTec V5)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add two Heltec LoRa v3 to a KEEPTEEN D5 Lora Solar enclosure. Also made a T114 version.

Ocena
5 / 5
Polubienia
35
Pobrania
146
Wydruki
1
Wyświetlenia
3049
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Wanted to add two Heltec LoRa v3 to a KEEPTEEN D5 Lora Solar enclosure. Also made a T114 version as I heard the Heltec LoRa v3 is too inefficient for such purpose.

Would like to add support for other models so do give me your values as this is a customiser based open scad script.

This won't support designs that requires top screws and cannot be slid in. Those will need to be a separate remix.

Also note that you may want to space the antenna so its not parallel with each other and interfere with each other.

Writeup: https://briankhuu.com/blog/2025/09/28/keepteen-d5-solar-lora-dual-heltec-v3-experimentation/

Also if you want to keep cost down, recommend checking out https://github.com/gargomoma/fakeTec_pcb as the D5 Solar Enclosure already has it's own charger circuitry so the T114 and LoRa32 v3 is a bit overkill with the support for oled screen (skippable here) and solar charger (not really needed here as well). As long as you are up for soldering it yourself of course!

Tagi