Mooney Aircraft Gust Locks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are gust locks for aircraft control surfaces. The flat ones can be use for most control surfaces.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a set of gust locks for the airplane…
Print two flat ones per control surface.
Buy one M4 Stainless all-thread per lock: https://a.co/d/c7f4P4Z
Grab some M4 stainless wing-nuts: https://a.co/d/4kXngE8
I'd also suggest some fender washers: https://a.co/d/4t1VE77
8/32 would probably work in place of M4 too.
I cut some pads out of 5mm EVA foam. This is high density closed cell foam that won't hold water.
https://a.co/d/5mvd9cP
I also suggest putting some shrink wrap around the threaded part that might touch paint once you work out the approximate distance between the pads.