T.16000M FCS LED covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed plates to cover the LED lights of the T.16000M FCS. Two models. Read description for more
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 97
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I was using the T.16000M FCS for space games, playing in dim lit rooms, and the LED light of the T.16000 felt distracting and at times irritating
I am new at 3D designs, and thought that this could be a fun project to test my FreeCAD skills that i got from watching a few videos.
I took apart one of my sticks to take a closer look at the orange plate and make good measurements. I can not recommend this, as it can be a bit tricky.
I have therefore made two version.
Plate Whole will replace the orange see through plate that the stick comes with. This requires that you take apart the handle of the stick in order to thread it through the plate. Please note that the small extension at the top of the plate is slightly thinner than the rest of the plate. There is therefore a top and bottom. Please remember this when printing and installing on the joystick
Plate Split i designed to just rest on top of the existing plate. You can create a gap at the top, by skewing the plate and prying the stick shaft through it. This is by far the easiest and imo best way.
NOTE: these will not block out all light. I was not able to make a perfect fit, but it does help. You could use some black silicone around the edges to do this even better, but at that point you could probably just paint it all black instead.
Anyway, I hope you can use it for your setup, or at least give it a try.
Happy flying! o7