Modular Router Plate for Bosch GKF-12V
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular router plate for the Bosch GKF-12V.
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 493
- Wydruki
- 4
- Wyświetlenia
- 4431
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Modular router plate for the Bosch GKF-12V.
Highly inspired and based on thing 3707881 by EpicFazer.
I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the added bonus on being almost as original when no attachment is on.
Currently has:
- Bosch FSN rail attachment
- Adjustable slide attachment, from center to ~11cm
The parts needed, in addition to the 3D printed parts is:
- 2x M3 threaded insert (Bondtech, but any should do)
- 2x M3x8mm hex socket bolt (DIN 912, a lot others would probably fit)
- 1x M4 threaded insert (same as above)
- 1x M4x30mm (could be a lot shorter, but that's something I had)
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
Fiberlogy PETG
Graphite/White
Notes:
In general chose the orientation that would produce the least amount of supports, in the least problematic areas.
"Supports on build plate only" in PrusaSlicer. Printed with 3 perimeters, to increase strength a bit.Category: DIY