Nyquist Keyboard Case (snap fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the case to have a solid bottom and a 3d printed plate. Also included a top bezel for it to "snap fit"…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Remixed the case to have a solid bottom and a 3d printed plate. Also included a top bezel for it to "snap fit" together so the bottom of the keys were flush to the top of the bezel to give it a more rounded look (a-la-WizardData Iris Case). You can still use screws though, there are screw holes for both interior and exterior attachment.
Mine in the photos has a switch on the side due to my keyboards using a BlueMicro BLE controller and needs a power switch. The STL's do not have that cut out and are 3 pieces where as mine had to be divided to fit on my smaller printer. If you also have a smaller printer I'd suggest cutting it up yourself so the division is what works best for you.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
18%
Filament:
Inland PLA/PETG
Rainbow
Notes:
Printed the case in PLA and the switch plate in PETG
Category: Electronics