Old Spice Deodorant Stand Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder with a wide base to prevent Old Spice Deodorant from tipping over.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I was getting annoyed at how often my Old Spice deodorant would tip over, so I designed a stand with a wide base to keep it upright. The fit is snug enough that it won’t fall out easily, but you can still remove it when the deodorant runs out and you grab a new stick (as long as your printer is tuned decently).
It works well for me, but feel free to remix it if it doesn’t fit your specific deodorant bottle. I’ve linked the Onshape document here if you’d like to modify it: https://cad.onshape.com/documents/90d3b2c3da7e3f461a1a70e0/w/f84d11ed77a063a922775d84/e/f78b1177fe7633d0d3b33857?renderMode=0&uiState=68d879e784420acdd75f35dc
Print Settings I Used:
Layer height: 0.2 mm
Ironing: enabled (optional, you don’t have to use it)
(I printed it on my “slightly” modified Ender 3 v3 SE running Klipper.)