1 / 3
Irwin snap ring pliers holder for Gridfinity
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage container with cut-outs for snap ring pliers. It was designed for irwin but should fit other models too
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
This is yet another variation of a few snap ring pliers containers here. I created one because I needed it to have gridfinity base and 10mm magnet cut-outs. If you want to play around with it, the original is in Onshape
I designed it upside down, so you may need to flip it over to print
Material: PLA (uses about 200g)
Layer height: 0.2mm
Wall loops: 2
Supports: No
Infill: 15%