1 / 1
Mixing dish for small amounts of 2-component adhesives or epoxy resin.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To mix and pour small amounts of 2-component adhesives or epoxy resin, I designed this dish.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I looked at several mixing dishes, but they lacked details like stability, grip, and a pour spout. I also wanted to use as little filament as possible, since I typically use the dish only once for 2-component adhesives. The mixing stick is shaped to match the dish’s rounded bottom to prevent unmixed adhesive from remaining in the corners.
Print instruction:
- material: PETG or similar
- supports: no
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required