Star Wars Galactic Empire Logo with LED backlight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is simple Galactic Empire Logo with recess for lighting.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
This is simple Galactic Empire Logo with recess for lighting. I didn't find what I need and make it.
There is a hole for wires at the bottom of the logo.
The file mount is designed for a tight fit with an 11mm hole.
I'm used WS2811B 1 meter LED strip with controller and 12V PSU.
For printing on small printers like mine (Flashforge AD5M), the part is divided into several pieces with grooves for precise positioning. After printing, I glued everything together with superglue and filled the gaps with automotive putty. Finally, the model was coated with adhesive primer and painted with all-purpose spray paint.