Model TACAN Radio Receiver Concentric X/Y Selection Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Concentric knob on radio with cutout for set screw.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Concentric knob on navigator radio with cutout for set screw. This is my first item made in Fusion. I've included the 3mf file if anyone would like to improve or modify the design.
This is only used on a model, so it doesn't have a set screw or keyed base to actuate a real switch.
As printed: Small hole 7.82mm, Large inset hole 16.53mm, overall height 11.22mm, overall diameter 19.86mm. I didn't compensate for the dimensional changes after cooling, but the item worked for my purpose.
Printed in Prusament Jet Black PETG, 0.15 mm structural setting, satin build plate, no supports, no brim needed.