1 / 4
Tech Deck-Finger Bored Skate Park Skate Board Ramp — zdjęcie 1
1 / 4

Tech Deck-Finger Bored Skate Park Skate Board Ramp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tech Deck-Finger Bored Skate Park with 2 ramps and 1 staircase feature

Ocena
5 / 5
Polubienia
62
Pobrania
934
Wydruki
1
Wyświetlenia
2101
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Tech Deck-Finger Bored Skate Park  Does not need to be scaled up or down. It is fully usable with tech decks. I also recommend using blue tack to prevent skate parks movement.

Resolution: I used 0.3mm but I recommend using lower like 1.5mm because I hade a lot of sanding to do.

Filament: I use PLA

no support needed 

no adhesion needed 

 

Tagi