Tesla Model 3 Highland Grocery Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook for bag handles in the Model 3 trunk
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
There are a few different versions of this hook. This one attempts to maximize the use in the Model 3 Highland refresh. Around each speaker in the trunk there are four 6mm threaded holes. You can use M6-1.0 x 20mm Flat Head Phillips screws to secure as many as 8 of these hooks in the trunk. I recommend using a low adhesion thread locker due to the vibration from the speakers.
Using hook by @peterkrull_138540, I extended the length, recessed the top to go around the round protrusions in the trunk that make up the 6mm threaded hole, and made the internal part a receptacle for a 6mm flathead machine screw.
G-Code provided changes the layer height in the screw thread area to make a more accurate thread, however the thread is not critical if using a screw. If you want to use the one 6mm threaded bolt that protrudes down in the trunk, this will work for that as well.