Revopoint Trackit / Trackit SR Crossline-Laser for easier Setup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount and aperture for crossline-laser to indicate the tracking area of the Trackit
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: Also works with the Trackit SR
Have a look at my other design for the Trackit!
Fancier WIP version: https://www.printables.com/model/1428220-wip-revopoint-trackit-fancy-fov-projecting-laserhttps://www.printables.com/model/1428220-wip-revopoint-trackit-fancy-fov-projecting-laser
This design is based on the Cigman CM-G02 crossline-laser. The step-files can be remixed for other lasers.
Function
The laser indicates roughly the tracking FOV of the Trackit and therefore makes it easier to setup the tracker for multiple scans. I initially designed a unit consisting of multiple single-line lasers but the lasers weren't strong enough.
With a snapped on aperture the lasers are limited to the FOV of the tracker to allow immediate feedback of positioning. Mounting to the tracker is realised with a mounting-plate which secures to the laser with a 1/4 camera-screw and slides on the Swiss-Plate of the tracker.
Mount and aperture are independent prints and are both friction-fit. Therefore you may need to adapt the step-files for best fit with your printer, especially for the Swiss-Plate mount.
The aperture is designed to limit the laser-lines to 3200mm*2800mm at 4m distance (as per tracker spec).
Printing
For the aperture it may be beneficial to use a 0,2mm nozzle to get a more detailed print.
BOM
Cigman CM-G03 crossline-laser
1/4in Camera-screw