1 / 1
Boss Katana Gen 3 - 15 degree tilt feet — zdjęcie 1

Boss Katana Gen 3 - 15 degree tilt feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Boss Katana Gen 3 - 15 degree tilt feet for stable positioning at an angle.

Ocena
0 / 5
Polubienia
5
Pobrania
14
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this model so that my Katana 50ex Gen 3 sits at an angle of roughly 15 degrees when I play. 

I wanted to keep the rubberized feet. These can be pushed in the new feet (tight fit, no wobble!). 

Use a longer screw (+ 10 mm) of same diameter and a washer to distribute the force on the screw head side. 

The amp sits firmly and does not tilt back too much (so it does not fall over).

Enjoy the model!I designed this model so that my Katana 50ex Gen 3 sits at an angle of roughly 15 degrees when I play. 

I wanted to keep the rubberized feet. These can be pushed in the new feet (tight fit, no wobble!). 

Use a longer screw (+ 10 mm) of same diameter and a washer to distribute the force on the screw head side. 

The amp sits firmly and does not tilt back too much (so it does not fall over).

Enjoy the model!

Tagi