Prusa CORE One Door Nut Wedge / Fastener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved version of the Nut Wedge with Brass Insert to secure the door handle without using double sided tapes.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 192
- Wydruki
- 10
- Wyświetlenia
- 1250
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The double sided tape for the Prusa CORE One door handle doesn't hold up well against higher chamber temperature prints, and would fall off. You can use a M3n nut to fasten a M3x10 or M3x8 screw, but it's quite ugly from the outside.
The wedge nicely hides the screw and gives it a premium look to the fastening of the door handle.
No print support, test printed with PETG (2g per wedge, you need 2 wedge per door).
You can use spare M3x10 or M3x8 screws from the assembly for securing the door handle.
The original model prints 69mm across and doesn't support brass inserts. My remix supports brass inserts of M3x4x5 (M3, length 4mm, OD 5mm) and reduces the length to 20mm to reduce material use and increase holding area on the door handle.