1 / 5
Fan Duct for Noctua NH-L9a-AM4 S300 - Mini-ITX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan Duct for Noctua NH-L9a-AM4 S300 - Mini-ITX
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified to fit on the NH-L9a-AM4NH-L9a-AM4 cooler increasing the height of the duct to fit flush with a S300 Mini-ITX Case.
The height is now 20mm
Temps improved by almost 10 degrees as you can see in the photos.
Machine: Ender 2 Pro (Not stock)
Print Settings:
Material: PLA, is fine since is not directly on metal or other hotter things, but ABS or other would be better.
Layer Height: 0.2 but also higher is fine
Infill: 100% having a different value saves only 2/3 g of filament unless you also play with walls