Coffee Doser for Philips Saeco Poemia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My original coffee doser from the coffee machine is on the edge to break, so I designed a spare just to be safe.It…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
My original coffee doser from the coffee machine is on the edge to break, so I designed a spare just to be safe. It works awesome. I'll probably make some similar designs for moka pot.
Print Settings
Printer:
Print Rite DIY
Rafts:
No
Supports:
Yes
Resolution:
0.22
Infill:
20 %
Notes:
Printed in green PLA.
Sliced with S3D
5 top/bottom solid layers
5 shell perimeters
I added 2 angles 45° and 90° to the support
I haven't tested the version with thinner walls, but probably it should be strong enough.
Post-Printing
After print
After the item has been printed I smoothed the lower face of the handle with my soldering iron, regulated with a TRIAC. To avoid coffee going in the small holes.
Category: Kitchen & Dining