1 / 6
59 mm curve height for 4x60mm Rept CB75 flexible cell interconnect — zdjęcie 1
1 / 6

59 mm curve height for 4x60mm Rept CB75 flexible cell interconnect

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Produces cell interconnects with more flexibility over the horizontal axis of movement.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Largest half will fit a 220x220 mm print bed 45 degrees diagonally with small cut in the corners.Increased 59 mm curve height instead of 47 mm. Largest half will fit a 220x220 mm print bed 45 degrees diagonally with small cut in the corners.

Errors in v2: too much flex in one half and uneven height and walls do not angle 90 degrees on base, too short guidance tracks.

With some drilling and sanding the v2 output is still useable. The result for 4 layers of 1 millimetre thick material is so much more flexible with less force compared to the sturdy result of height 47 mm, I am a happy camper.