5203 312rpm 19.2:1 to 1:1 modifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GoBilda 19.2:1 adapter to 1:1
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I took the drawings of the GoBidla adapater turning the 5203 312 rpm motor into a 6000 rpm motor by replaceing the 19.2:1 gearing down to a 1:1. I have successful tests with this motor and an Artifact shooting it 12 ft across the room at the height of 7ft with this installed. I have only worked with the Large Gear setup but using the same drawing made the small version. If i test I will update any changes.
The wear on the gearing is unknown at this point, we will be doing more test firings before a check of the gear is verified ( about 30-50 shots ). I used PETG but once testing is complete may go to a Nylon to ensure its strength during competitions.
You can purchase these at Gobilda but were out of stock at the time of making.
6 layers 60% PETG for first Test