1 / 5
Wide angle steering for Tamiya M-05 + metal steering posts — zdjęcie 1
1 / 5

Wide angle steering for Tamiya M-05 + metal steering posts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improvement of the previous model, including steering post modification to reduce play

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
127
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This model allows increased stering angle, like the previous model, but has sturdier geometry. It includes new steering post stays which use 19808016 steering posts, which reduce play in the steering system. The steering arms are now 1mm thicker, so the original B3 parts cannot be used anymore. Additionaly, there's a 1mm thick insert under the steering arm, so the steering bridge sots 2mm higher to clear the chassis with increased angle. This requres to lift the pivot balls on the knuckles by the same amount to keep correct geometry without bump steer.

The steering post mod can be used with the stock steering aswell, as an alternative to Tamiya 54193 option part, but requires extra shimming, as these posts are 2mm higher than Tamiya original solution.

Additional parts needed:

  • M3x10 grub screw
  • M3x12 grub screw
  • M3x5 (or M3x6) button head screw
  • M3x15 button head screw

 

Tagi